Aquasky rot-3 replacement filters original ( organic cellulose ) for 4 stage under sink aquasky rot 3 Reverse osmosis water systems,99% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water. it include 3 filters and amembrane that must be replaced periodically, The different filters represent the different stages that the water goes through while being purified, Generally - Pre-Filters and post-Filters in aquasky RO systems can last around 8 To 12 months between changes. Only the original organic RO membranes can last as long as 5 years


Stage 1-
Sediment filter is the first filter installed in Aquasky rot-3 reverse osmosis water filters systeme .
The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as carbon block or GAC filters.
Micron rating: 5 micron
Lifetime: please replace every year, depending on the water quality.

This filter is wrapped and sealed and meets NSF Standards and Regulations. Filter will fit any residential reverse osmosis unit that features standard 10” filter housing ( look for compatible systems list )

stage 2-
 
 
Organic original Activated Carbon Block Filter are made of fine coconut shell carbon

Remove odors and tastes of many organic compounds and chlorine especially.
Because this filters are made of a packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt.
 
 
Micron rating: 5 Micron.
 
 
Lifetime: please replace every year, depending on the water quality.


This filter is wrapped and sealed and meets NSF standards and regulations. Filter will fit any residential reverse osmosis unit that features standard 10” filter housing ( look for compatible systems list )

Stage 3-
Original organic aquasky ROT-3 - 50 GPD NSF certified thin film TFC
Membrane is the main component of Aquasky rot-3 reverse osmosis unit.
Made with 100% Organic fine thin film flat sheet
99% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water.
Only the original organic aquasky rot -3 membrane has The micron rating of a thin film less than 1/10000th of a Micron which is 620,000 times finer than A human hair, 2,500 times smaller than bacteria and 20 Times smaller than any virus.
 
Product Features:
 
 
50 Gallons Per Day (13.8 -21.6 Liters per Hour) Capacity.
 
 
99.9% stabilized salt rejection (minimum rejection 94%).
 
 
NSF/ANSI Standard 58 listed.
 
 
Operating Conditions Performance specifications based on 800ppm tap water,60 psi (0.45 MPa) applied pressure, (27°C) feed water temperature, feed water pH 7.6-8.7 and 25% recovery. Element permeate flow may vary ± 19%.
 
 
Maximum operation pressure: 120 psi (0.86 MPa).
 
 
Maximum feed flow rate: 2 gpm.
 
 
Maximum operating temperature: 112° F (44.9° C).
 
 
Maximum feed water turbidity: 1.9 NTU.
 
 
Maximum feed water SDI (15min): 8.
 
 
Chlorine tolerance: 0
 
 
Feed water pH range: 3-12.
 
 
Minimum brine flow to permeate flow ratio: 3:1.


Stage 4-
Original organic Inline carbon filter for aquasky rot-4 is known as polishing filters, because they would usually be the last stage of any standard reverse osmosis circuit.
Being made of high quality coconut shell carbon they stabilize the water tasting qualities and further remove any traces of bad tastes and odors.
 
 
 
Lifetime: please replace ones in 1- 2 years.



This filter is wrapped and sealed and meets NSF Standards and Regulations.